Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 119

High-beam headlamps
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the high beam is activated, the indica‐
tor lamp for low beam L is deactivated
and replaced by the indicator lamp for the
high beam K.
To switch off: move the combination switch
#
back to its starting position.
High-beam flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signals
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding indicator will flash three
times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2
Vehicles with Active Lane Change Assist
The Active Lane Change Assist can:
lengthen turn signal operation for the
R
duration of the lane change if the driver
has activated the indicator.
automatically activate the turn signal indi‐
R
cator if the driver indicated to turn in that
direction immediately beforehand but a
lane change was not immediately possi‐
ble.
Activating/deactivating the hazard warning
lights
or 4.
Press button
#
Light and visibility 117
1 .