Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 59

If necessary, move head restraint
#
upwards ( page 91).
→
Install the LATCH-type (ISOFIX) child restraint
#
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
Guide Top Tether belt
#
restraint 1
bars.
Hook Top Tether hook
#
into Top Tether anchorage 2.
Tension Top Tether belt 4. Always comply
1
#
with the child restraint system manufactur‐
er's installation instructions when doing so.
If necessary, slide head restraint
#
wards ( page 91). Make sure that you do
→
not interfere with the correct routing of Top
Tether belt 4.
4 under head
between the two head restraint
3 without twisting
1 down‐
Occupant safety
Securing the child restraint system with the
seat belt
Attaching the child restraint system with the
seat belt on the rear seat
& WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
If this is the case, the vehicle occupant
R
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
Objects or loads in the trunk/cargo com‐
R
partment cannot be restrained by the
seat backrest.
57