Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 396

394 Wheels and tires
impair the steering and handling characteris‐
tics and lead to brake failure.
Observe the load-bearing capacity of
#
the tires.
The load-bearing capacity must be at
#
least half the gross axle weight rating of
the vehicle.
Never overload the tires by exceeding
#
the maximum load.
The Tire and Loading Information placard is on
the B-pillar on the driver's side of the vehicle.
1 Tire and Loading Information placard
% The data shown in the illustration is example
data.
The Tire and Loading Information placard shows:
Maximum number of seats
R
the maximum number of people permitted to
travel in the vehicle.
Maximum permissible load
R
gross weight of all vehicle occupants, load
and luggage.
Recommended tire pressures
R
tires. The recommended tire pressures are
valid for the maximum permissible load and
up to the maximum permissible vehicle
speed.
Please also note:
Information on permissible weights and loads
R
on the vehicle identification plate
( page 418).
→
Information on tire pressure in the tire pres‐
R
sure table (
Further related subjects:
Determining the maximum permissible load
R
( page 394)
→
Notes on tire pressure (
R
Determining the maximum permissible load
2 according to
The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575, pur‐
3 comprises the
suant to the "National Traffic and Motor Vehicle
Safety Act of 1966".
1 for cold
page 389).
→
page 388).
→