Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 262

260 Multimedia system
WPS PBC
R
The connection to a secure Wi-Fi network is
made by pressing a button (push button).
Security key
R
The connection to a secure Wi-Fi network is
made via a security key.
Setting up Wi-Fi
Requirements:
The device to be connected supports one of
R
the three means of connection described
( page 259).
→
Multimedia system:
System ö Connectivity
, .
Activating/deactivating Wi-Fi
Switch Wi-Fi on O or off ª.
#
If Wi-Fi is deactivated ª, communication via
Wi-Fi to all devices is interrupted. This also
means that a connection to the HERMES
communication module cannot be estab‐
lished. Then functions such as dynamic route
guidance with Live Traffic Information are not
available.
Connecting the multimedia system with a
device via Wi-Fi
This function is available if a HERMES communi‐
cation module is not installed.
The type of connection established must be
selected on the multimedia system and on the
device to be connected.
% The connection procedure may differ
depending on the device. Follow the instruc‐
tions that are shown in the display. Further
information (see the manufacturer's operat‐
ing instructions).
Select Internet Settings.
#
Select Search for Wi-Fi Networks.
#
Using a security key
Select a Wi-Fi network in the list.
#
Have the security key displayed on the device
#
to be connected (see the manufacturer's
operating instructions).
Enter this security key on the multimedia sys‐
#
tem.
Confirm the entry with ¡.
#
% All devices support a security key as a
means of connection.
Using a WPS PIN
Highlight a Wi-Fi network in the list.
#
Select ¥ Connect via WPS PIN
#
The multimedia system generates an eight-
digit PIN.
Enter this PIN on the device to be connected.
#
Confirm the entry.
#
Using a button
%
This function is only available in a Wi-Fi fre‐
quency of 2.4 GHz.
Highlight a Wi-Fi network in the list.
#
Select ¥ Connect via WPS
#
Select "Connect via WPS PBC" in the options
#
on the device to be connected.
Press the WPS button on the device to be
#
connected.
Select Continue in the multimedia system.
#
Input.
PBC.