Siemens RUGGEDCOM RS900GP Installation Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Switch
  5. RUGGEDCOM RS900GP
  6. Installation manual
Siemens RUGGEDCOM RS900GP Installation Manual

Siemens RUGGEDCOM RS900GP Installation Manual

Hide thumbs Also See for RUGGEDCOM RS900GP:
Table of Contents

Advertisement

Quick Links

Download this manual
RUGGEDCOM RS900GP
Installation Guide
07/2018
RC1026-EN-05
Preface
Introduction
Installing the Device
Device Management
Communication Ports
Technical Specifications
Certification
1
2
3
4
5
6

Advertisement

Table of Contents
loading

Related Manuals for Siemens RUGGEDCOM RS900GP

Summary of Contents for Siemens RUGGEDCOM RS900GP

  • Page 1 Preface Introduction Installing the Device RUGGEDCOM RS900GP Device Management Communication Ports Technical Specifications Installation Guide Certification 07/2018 RC1026-EN-05...
  • Page 2 Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
  • Page 3 RUGGEDCOM RS900GP Installation Guide Contacting Siemens Address Telephone E-mail Siemens Canada Ltd Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario https://www.siemens.com/ruggedcom Canada, L4K 5C7...
  • Page 4 RUGGEDCOM RS900GP Installation Guide...

  • Page 5: Table Of Contents

    RUGGEDCOM RS900GP   Installation Guide Table of Contents Table of Contents Preface ......................Alerts ..............................vii Related Documents ..........................viii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ..................... 1.1  Feature Highlights ........................1 1.2    Description ........................... 2 1.3  Required Tools and Materials ......................
  • Page 6   RUGGEDCOM RS900GP Table of Contents Installation Guide 4.4  SFP Transceivers ......................... 21 Chapter 5 Technical Specifications .................. 5.1  Power Supply Specifications ......................23 5.2  PoE Output Specifications ......................23 5.3  Failsafe Alarm Relay Specifications ....................24 5.4  Copper Ethernet Port Specifications ....................24 5.5  Fiber Optic Ethernet Port Specifications ..................24 5.6  Operating Environment .......................

  • Page 7: Preface

    Installation Guide Preface Preface This guide describes the RUGGEDCOM RS900GP. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device.

  • Page 8: Related Documents

    Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request...

  • Page 9: Customer Support

    RUGGEDCOM RS900GP   Installation Guide Preface • Contact a local Siemens representative from Sales, Technical Support, Training, etc. • Ask questions or share knowledge with fellow Siemens customers and the support community Customer Support...
  • Page 10   RUGGEDCOM RS900GP Preface Installation Guide Customer Support...

  • Page 11: Introduction

    Installation Guide Introduction Introduction The RUGGEDCOM RS900GP is an industrially hardened, fully managed Ethernet switch providing dual fiber optical Gigabit Ethernet ports and eight Fast Ethernet copper ports, each capable of supplying high power 802.3at compliant Power over Ethernet (PoE).

  • Page 12: Description

    • Complies with IEEE 802.3af, 15 W x 8 output when using 48 VDC power supplies Section 1.2 Description The RUGGEDCOM RS900GP features various ports, controls and indicator LEDs on the front panel for connecting, configuring and troubleshooting the device. Figure 1: RUGGEDCOM RS900GP 1. Fiber Optic or SFP (Small Form-Factor Pluggable) Ethernet Ports   ...

  • Page 13: Required Tools And Materials

    Section 2.7, “Connecting Power” • Section 5.1, “Power Supply Specifications” Section 1.3 Required Tools and Materials The following tools and materials are required to install the RUGGEDCOM RS900GP: Tools/Materials Purpose DC power cord (16 AWG) For connecting power to the device. CAT-5 Ethernet cables For connecting the device to the network.
  • Page 14 Chapter 1 RUGGEDCOM RS900GP Introduction Installation Guide Decommissioning and Disposal...

  • Page 15: Installing The Device

    RUGGEDCOM RS900GP Chapter 2 Installation Guide Installing the Device Installing the Device This section describes how to install the device, including mounting the device, connecting power, and connecting the device to the network. DANGER! Electrocution hazard – risk of serious personal injury and/or damage to equipment. Before performing any maintenance tasks, make sure all power to the device has been disconnected and wait approximately two minutes for any remaining energy to dissipate.

  • Page 16: General Procedure

    Section 2.3 Cabling Recommendations Siemens does not recommend the use of copper cabling of any length for critical, real-time substation automation applications. All copper Ethernet ports on RUGGEDCOM products include transient suppression circuitry to protect against damage from electrical transients and conform with IEC 61850-3 and IEEE 1613 Class 1 standards. This means that during a transient electrical event, communications errors or interruptions may occur, but recovery is automatic.

  • Page 17: Mounting The Device

    Section 2.4.1 Mounting the Device on a DIN Rail For DIN rail installations, the RUGGEDCOM RS900GP can be equipped with a DIN rail bracket that allows the device to be slid onto a standard 35 mm (1.4 in) DIN rail. To mount the device to a DIN rail, do the following: Secure the DIN rail bracket to the back of the device chassis.
  • Page 18 Chapter 2 RUGGEDCOM RS900GP Installing the Device Installation Guide Figure 2: DIN Rail Bracket Assembly 1. DIN Rail Bracket    2. Screw Align the slot in the bracket with the DIN rail. Figure 3: DIN Rail Mounting 1. DIN Rail    2. DIN Rail Bracket Pull the release on the bracket down and slide the device onto the DIN rail. Let go of the release to lock the device in position.

  • Page 19: Mounting The Device To A Panel

    Installing the Device Section 2.4.2 Mounting the Device to a Panel For panel installations, the RUGGEDCOM RS900GP can be equipped with panel adapters that allow the device to be attached to a panel in multiple orientations. Figure 4: Panel Mount Options 1. Rear Mount Orientation    2. Front Mount Orientation    3. Side Mount Orientation Secure the adapters to the device in the desired orientation.

  • Page 20: Grounding The Device

    Grounding the Device The RUGGEDCOM RS900GP chassis features a threaded hole for connecting the device to ground (Earth). It is recommended to terminate the ground connection with an M3 ring or spade lug, and then torque to 1.7 N·m (15 lbf-in).

  • Page 21: Connecting The Failsafe Alarm Relay

    Control of the failsafe relay output is configurable through ROS. One common application for this relay is to signal an alarm if a power failure occurs. For more information, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RS900GP. The following shows the proper relay connections.

  • Page 22: Connecting Power

    Installation Guide Section 2.7 Connecting Power The RUGGEDCOM RS900GP features an integrated low DC power supply that accepts input from redudant power sources. Requirements for the power source(s) is dependent on the IEEE 802.3 standard required by the application: Input Range...
  • Page 23 RUGGEDCOM RS900GP Chapter 2 Installation Guide Installing the Device CAUTION! Electrical hazard – risk of damage to the device. For Power-over-Ethernet (PoE) support, make sure the PoE power source is isolated from earth/chassis ground. Do not connect either positive or negative terminals to chassis ground.
  • Page 24 Chapter 2 RUGGEDCOM RS900GP Installing the Device Installation Guide Connecting Power...

  • Page 25: Device Management

    Connecting to the Device The following describes the various methods for accessing the ROS console and Web interfaces on the device. For more detailed instructions, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RS900GP. Serial Console Port Connect a PC or terminal directly to the serial console port to access the boot-time control and RUGGEDCOM ROS console interface.

  • Page 26: Configuring The Device

    Chapter 3 RUGGEDCOM RS900GP Device Management Installation Guide Name Description Reserved (Do Not Connect) Transmit Data Receive Data Reserved (Do Not Connect) Signal Ground Reserved (Do Not Connect) Reserved (Do Not Connect) Figure 9: Serial DB9 Console Port Reserved (Do Not Connect) Reserved (Do Not Connect) Connected internally.

  • Page 27: Communication Ports

    Communication Ports Communication Ports The RUGGEDCOM RS900GP features eight standard 10/100Base-TX copper RJ45 Ethernet ports capable of Power- over-Ethernet (PoE). It can also be equipped with two additional Gigabit Ethernet capable ports, for which many fiber transceiver and copper options are available.
  • Page 28 Chapter 4 RUGGEDCOM RS900GP Communication Ports Installation Guide WARNING! Electric shock hazard – risk of serious personal injury and/or equipment interference. If shielded cables are used, make sure the shielded cables do not form a ground loop via the shield wire and the RJ45 receptacles at either end.

  • Page 29: Poe Ports

    Section 4.2 PoE Ports The RUGGEDCOM RS900GP supports eight 10/100Base-TX Power over Ethernet (POE) ports (ports 1 to 8). Each port complies with the IEEE 802.3at and IEEE 802.3af standards, and feature the ability to automatically enable/ disable power when PoE-capable devices are connected or removed.
  • Page 30 Chapter 4 RUGGEDCOM RS900GP Communication Ports Installation Guide Standard Power Budget IEEE 802.3af 135 W If the power input is less than what is required, to prevent exceeding the power budget, port priorities can be set via the RUGGEDCOM ROS operating system to disable low priority ports when demand is too high. Ports can also be enabled/disabled and placed on a power schedule to conserve power.

  • Page 31: Fiber Optic Ethernet Ports

    Specifications”. Section 4.4 SFP Transceivers The RUGGEDCOM RS900GP supports up to two Small Form-Factor Pluggable (SFP) transceiver sockets, which are compatible with a wide array of SFP transceivers available from Siemens. LEDs Each socket features an LED that indicates its link state.
  • Page 32 Link established Green (Blinking) Activity No link detected Compatible SFP Transceivers The following SFP transceivers are compatible with the RUGGEDCOM RS900GP. For more information, including installation/removal instructions and ordering information, refer to the RUGGEDCOM SFP Transceiver Catalog [https://support.industry.siemens.com/cs/ca/en/view/109482309]. IMPORTANT! Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens accepts no liability as a result of performance issues related in whole or in part to third-party components.

  • Page 33: Technical Specifications

    273 W (T) denotes time-delay fuse Section 5.2 PoE Output Specifications The RUGGEDCOM RS900GP adheres to the following power output and IEEE 802.3 specifications depending on the input voltage supplied to the device. Power In Power Out 51 to 57 VDC 50 to 57 VDC, 30 W per Port Maximum (IEEE 302.at)

  • Page 34: Failsafe Alarm Relay Specifications

    Section 5.4 Copper Ethernet Port Specifications The following details specifications for all standard and optional fixed copper Ethernet ports that can be ordered with the RUGGEDCOM RS900GP. For more information about the SFP ports, refer to Section 4.1, “Copper Ethernet Ports”. NOTE •...

  • Page 35: Operating Environment

    Ambient Storage Temperature -40 to 85 °C (-40 to 185 °F) Ambient Relative Humidity 5% to 95% Maximum Altitude 2000 m (6562 ft) Measured from a 30 cm (12 in) radius surrounding the center of the RUGGEDCOM RS900GP enclosure. Operating Environment...

  • Page 36: Mechanical Specifications

    Chapter 5 RUGGEDCOM RS900GP Technical Specifications Installation Guide Non-condensing Over temperature range of -40 to 85 °C (-40 to 185 °F) Section 5.7 Mechanical Specifications Weight 2.3 kg (5 lbs) Ingress Protection IP40 (1 mm objects) Enclosure Aluminum Section 5.8 Dimension Drawings NOTE All dimensions are in millimeters, unless otherwise stated.
  • Page 37 RUGGEDCOM RS900GP Chapter 5 Installation Guide Technical Specifications 44.5 38.1 156.9 26.0 64.1 Figure 21: Panel Mount Dimensions (Rear Mount Shown) Dimension Drawings...
  • Page 38 Chapter 5 RUGGEDCOM RS900GP Technical Specifications Installation Guide 90.0 44.5 79.1 17.8 38.1 137.9 Figure 22: Panel Mount Dimensions (Side Mount Shown) Dimension Drawings...
  • Page 39 RUGGEDCOM RS900GP Chapter 5 Installation Guide Technical Specifications 174.2 163.1 175.8 Figure 23: DIN Rail Mount Dimensions Dimension Drawings...
  • Page 40 Chapter 5 RUGGEDCOM RS900GP Technical Specifications Installation Guide Dimension Drawings...

  • Page 41: Certification

    RUGGEDCOM RS900GP Chapter 6 Installation Guide Certification Certification The RUGGEDCOM RS900GP device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. CONTENTS • Section 6.1, “Approvals” • Section 6.2, “EMC and Environmental Type Tests”...

  • Page 42: European Union (Eu)

    Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to “Contacting Siemens”.

  • Page 43: Ised

    Chapter 6 Installation Guide Certification Section 6.1.5 ISED This device is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation Science and Economic Development Canada) standard: • CAN ICES-3 (A)/NMB-3 (A) Section 6.1.6 ACMA This device meets the requirements of the following Australian Communications and Media Authority (ACMA) standards under certificate ABN 98 004 347 880: •...

  • Page 44: Other Approvals

    • EN50121-4 Railway applications – Electromagnetic Compatibility – Emission and Immunity of the Signaling and Telecommunications Apparatus Section 6.2 EMC and Environmental Type Tests The RUGGEDCOM RS900GP has passed the following Electromagnetic Compatibility (EMC) and environmental tests. EMC Type Tests Test Description...
  • Page 45 EMC Immunity Type Tests per IEEE 1613 NOTE The RUGGEDCOM RS900GP meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper Ports. Class 1 allows for temporary communication loss, while Class 2 requires error-free and interrupted communications.
  • Page 46 Chapter 6 RUGGEDCOM RS900GP Certification Installation Guide EMC and Environmental Type Tests...

Table of Contents