Scroll.speed; Default; Disp.color. Setting; Disp. Direction. Setting - JRC NJJ-105 Handy Search User Manual

2.3.16 Scroll.speed

You can specify a scrolling speed by this parameter. The available settings are Step up and
Constant . Select Step up when the scrolling speed is getting faster gradually. Select Constant
when the scrolling speed is constant. Set a desired setting to this parameter in accordance with the
procedure described in section 2.3.
Remarks
• By using the setting of Constant , you can confirm the number of rebar and the reinforced
condition in the concrete by scrolling the scan screen.

2.3.17 default

You can reset all the parameters other than the Data/time back to the standard settings (initial
settings at the factory shipment) by this parameter. To revert to the standard settings, set YES to
this parameter in accordance with the procedure described in Section 2.3. After resetting the
parameters, the settting of this parameter changes automatically to NO .

2.3.18 disp.color. setting

You can specify the initial setting for disp. color (the display color) at the power on by this
parameter. The available settings are the last end and default . The the last end sets the
previous setting at the power off to the display color at the power on. The default sets the
pre-defined setting ( color1 ) to the display color at the power on. Set a desired setting to this
parameter in accordance with the procedure described in section 2.3.

2.3.19 disp. direction. setting

You can specify the initial setting for disp. direction (the display direction) at the power on by
this parameter. The available settings are the last end and default . The the last end sets the
previous setting at the power off to the display direction at the power on. The default sets the
pre-defined setting ( normal ) to the display direction at the power on. Set a desired setting to this
parameter in accordance with the procedure described in section 2.3.
- 23 -