Data No; Folder - JRC NJJ-105 Handy Search User Manual

2.3.8 data No.

You can specify the data number for the external output dat by this parameter. The scan result
data is recorded and numbered when being externally output. This parameter displays the current
data number of the output data, and the data number (Data No.) in this parameter is incremented
each time when the data is recorded and output. Set a desired data number to this parameter in
accordance with the procedure described in section 2.3.
Remarks
• When the data are recorded again, it can be easily managed by changing the value
of the data No.

2.3.9 Folder

You can specify one folder among 10 predefined folders in the CF memory by this parameter.
The file operation (saving, reading, and deleting the scan data file) is performed under the specified
folder in the CF memory. The available settings are
desired setting to this parameter in accordance with the procedure described in section 2.3.
Remarks
• When using a blank CF memory (which does not have any folders of DATA , DATA02 , --- ,
DATA10 ), insert the CF memory into this product and cycle the power of the product. Then
this product creates 10 folders automatically in the CF memory. When the CF memory has
only DATA
DATA10 automatically.
• Regarding the data save/recall operation of the scan data in CF memory, see Section 3.6
External output methods and Section 3.7 CF Control Screen.
folder, cycling the power of this product creates 9 folders of DATA02 , --- ,
- 20 -
DATA , DATA02 , --- , DATA10 . Set a