Glossary Of Terms - JRC NJJ-105 Handy Search User Manual

A-mode
B-mode
BA-mode
Real time
auto surface wave
processing
Real time
manual deduction
processing
Real time
auto user
surface wave
processing
Fixed surface
wave
processing
User surface wave
processing
Deduction
processing
Manual
surface wave
processing
Average wave
processing
Peak processing

Glossary of Terms

Displays received waveform as it is. The conditions of concrete directly
underneath this product are displayed as reflected waveform in real time.
Displays the vertical cross section of a scan point by gradating the
reflected waveform shown in A-mode according to reflection intensity and
continuously displaying it.
Displays both B-mode and A-mode images at the same time.
Image processing to automatically remove the unwanted waves reflected
from the concrete surface during scanning by using the internal fixed
surface wave data and shows only the reflected wave from rebar etc.
Image processing used in the case where the unwanted waves reflected
from the concrete surface can not be fully removed by using the real time
auto surface wave processing and the unwanted waves remain as the
form of stripes in the scan result.
In this Image processing, an arbitrary line is designated while scanning.
The data of the designated line is subtracted from the scan result data,
and the reflected wave from the concrete surface is automatically
removed. Thus, only the reflected waves from rebar etc. are shown.
Image processing to automatically remove the unwanted waves reflected
from the concrete surface during scanning by using the surface wave data
which are defined by the user and stored in the product and shows only
the reflected wave from rebar etc.
Image processing to remove the unwanted waves reflected from the
concrete surface by using the internal fixed surface wave data and shows
only the reflected wave from rebar etc.
Image processing to remove the unwanted waves reflected from the
concrete surface by using the surface wave data which are defined by the
used and stored in the product and shows only the reflected wave from
rebar etc.
Image processing to remove the stripe reflected waves throughout the
entire depth, such as reflected waves from the concrete surface and from
the rear surface etc. In this processing, an arbitrary line in the scan result
is designated and the designated line is subtracted from the scan result
data and only the reflected waves from rebar etc. are shown.
Image processing to remove the unwanted waves reflected from the
concrete surface by using the surface wave data of the disignated
position in the search results and shows only the reflected waves from
rebar etc. In this processing, an arbitrary line is designated from scan
results. The surface portion of the designated line is subtracted from the
scan result data, and the reflected waves from the concrete surface is
removed.
Image processing to remove the stripe reflected waves throughout the
entire depth, such as reflected waves from the concrete surface and from
the rear surface etc. In this processing, the averaged waveform of the
entire scan results data are calculated and is subtracted from the scan
result data, and only the reflected waves from rebar etc. are shown.
Image processing that shows only the waveform of the first peak on the
+side of the scan result. This enables removal of multiple reflected
signals and only displays the upper rebar.
ix