2.2 Example of the Scan Screen
Describes each display on the scan screen.
2.2.1 Scan screen example (during scanning)
An example of a scan screen (during scanning) is shown in Figure 2-4.
(1)Depth calibration value
(2)Scan mode
(3)Depth gauge
(4)Fixed cursor
(5)Sensitivity
display
(1) Depth calibration value
Displays the depth calibration value set at the parameter setting screen. See Section
2.3.6 depth to set the depth calibration value.
(2) Scan mode
Displays the scan mode set at the parameter setting screen. When selecting the
distance feed scan,
selected,
s
is displayed. See Section 2.3.5 X-axis to set the scan mode.
▼
Figure 2-4 Scan screen example (during scanning)
m ,
cm , or
mm
- 12 -
(6)Antenna Mark
▼
is displayed. When the time feed scan is
(7)Distance gauge
(8)Battery meter
(9)Display range
(10)Image processing
display
(11)External data output
display