3.7 Telnet Access Configuration Examples using
Local Users with hsecure disabled
3.7.1
Local Password Configuration - Password Security
Disabled
For this configuration example, we will configure the following.
Change the default read-write-all user name from rwa to user1
o
For user1, use the password rwaccess
Change the default read-only user name from rw to user2
o
For user2, use the password readwrite
Change the default login and password prompt from Login: and Password: to Enter username:
and Enter your password:
Step 1 – Add new user names and passwords
VSPswitch:1(config)#cli password user1 read-write-all
Enter the old password : *** (rwa)
Enter the New password : ******** (rwaccess)
Re-enter the New password : ********
Step 2 – Change default login user and password prompt
VSPswitch:1(config)#no login-message
VSPswitch:1(config)#login-message "Enter username: "
VSPswitch:1(config)#no passwordprompt
VSPswitch:1(config)#passwordprompt "Enter your password: "
March 2015
Avaya Inc. – External Distribution
avaya.com
22