Enhanced Security Password Requirements; Enhanced Security Configuration - Avaya VSP 4000 Technical Configuration Manual

access level cannot access audit logs or security
settings
Auditor The auditor access level can view configuration
information, status information, and audit logs.
Security The security access level can change security
settings only. The security access level also has
permission to view configuration and status
information.
2.1.1

Enhanced Security Password Requirements

After enabling enhanced security mode on the switch, you will be able to login for the first time using a
user name and password of admin/admin and then will be prompted to change both the user name and
password. The password for the admin user must be 15 characters and made up of two of the following
characters:

Two uppercase character, from the range: ABCDEFGHIJKLMNOPQRSTUVWXYZ

Two lowercase character, from the range: abcdefghijklmnopqrstuvwxyz

Two numeric character, from the range: 1234567890

Two special character, from the range: `~!@#$%^&*()_-+={[}]|\:;"'<,>.?/
Please note the above requirement applies only to the administrator user.
2.1.2

Enhanced Security Configuration

Enable enhanced secure mode and reboot switch
VSPswitch:1(config)#boot config flags enhancedsecure-mode
Warning: Enhancedsecure-mode flag is enabled
Warning: Please save configuration and reboot the switch
for this to take effect.
VSPswitch:1(config)#save config
VSPswitch:1(config)#reset –y
After the switch reboots, login using the initial administrator user name and password
admin/admin and then change user name and use a password made up of 15 characters total
using the requirements as outlined in section 2.1.1.
Copyright(c) 2010-2015 Avaya, Inc.
All Rights Reserved.
Virtual Services Platform 8200
VSP Operating System Software Build 4.2.0.0_B015 (PRIVATE)
Built: Thu Mar 12 18:18:49 EDT 2015
March 2015
Avaya Inc. – External Distribution
avaya.com
SSH/Telnet (in band/mgmt)/
console/
SSH/Telnet (in band/mgmt)/
console/
12
of