Husqvarna Rider 100 series Workshop Manual page 45

Repair instructions
4 Lift off belt 1.
5 Remove the spring for the belt tensioner for
belt 2 (transmission belt).
Rider 111 B5:
Rider 111 B/112 /115 C/120 C:
6 Remove the cover on the left hand side of the
rear carriage.
7 Pull off belt 2 from the transmission, first from
the rear belt pulley and then from the front.
8 Pull off belt 3 at the front, lift it over the lever arm
of the cutting unit, then lift it off at the rear.
Fit the belt in the reverse order.
English – 45