Husqvarna Rider 100 series Workshop Manual page 33

3 Remove the rear cover of the front carriage.
4 Loosen the spring for belt 1 (engine belt) using a
spring hook.
5 Remove the belt tensioner.
6 Pull belt 1 off the belt pulley.
Rider 111 B5/112 C5:
7 Loosen the spring that is tensioning belt 2
(transmission belt) using a spring hook.
Rider 111 B/112 C/115 C/120 C:
7 Loosen the spring that is tensioning belt 2
(transmission belt) using a spring hook.
Repair instructions
English – 33