ResMed S8 AutoSet Spirit User Manual page 20

When the
backlight turns off after two minutes of inactivity and the Start/Stop key dims.
H C
OW TO HANGE THE
You can change settings on the
When the
menu) on the LCD screen in order to view and change the settings for a particular
function.
Your clinician will preset the menu to either a standard view or a detailed view.
See "How to Use the Standard Menu" on page 17 and "How to Use the Detailed
Menu" on page 19 for more information.
H
OW TO ENTER THE MENU SCREENS
When the
will see the word "menu" in the left-hand corner. To select an
menu, press the Left key.
H
OW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
H
OW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
H
OW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the standby (RAMP or
SETTLING) screen.
H
OW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
R S
AMP AND
If your clinician has set your
displayed after the Welcome screen. If your clinician has set your
AutoSet mode, the SETTLING screen is displayed after the Welcome screen.
14
device is in standby mode all keys remain lit. During therapy, the keypad
S8
S
ETTINGS
S8 A
is in standby mode you can display a series of screens (a
S8 A S S
UTO ET PIRIT
standby (RAMP or SETTLING) screen is displayed you
S8 A S S
UTO ET PIRIT
ETTLING
S8 A
UTO
by using the keypad and LCD.
S S
UTO ET PIRIT
to CPAP mode, the RAMP screen is
S S
ET PIRIT
S8 A S S
UTO ET PIRIT
to
S8 A S S
UTO ET PIRIT