Scope Of Supply; Diagram Of Connections; Pwd 750 Litre Combo Tank - Dimplex PWD 750 Installation And Operating Instructions Manual

1
1

Scope of supply

 1 x PWD combo tank (on a wooden pallet)
 2 x temperature sensor for domestic hot water
(1 x NTC 2 and 1 x NTC 10)
 1 x installation instructions
 1 x type plate
 2 x PWD combo tank packaging label
(items under point 2-6 affixed to tank in clear
envelope)
 1 x PWD insulation (complete) with cover and collars
2

Diagram of connections

2.1 PWD 750 litre combo tank

1) Transport eyebolt
2) 1 1/4" Rp sleeve for de-aeration
3) Neck flange with heat exchanger without circulation
4) 1 1/2" Rp sleeve for immersion heater
5) 1 1/4" Rp sleeve for heat pump flow
DHW preparation
6) 1 1/4" Rp sleeve for heat pump return
DHW preparation
7) 1 1/4" Rp sleeve for flow (outlet)
8) 1 1/4" Rp sleeve for flow (inlet)
9) Neck flange for optional solar heat exchanger
10) 2 brackets for hot water sensors
11) 2 brackets for buffer tank sensors (for use with a solar con-
nection)
12) 1/2" Rp sleeve with immersion sleeve for thermometers
13) Threaded socket with adjusting screws
EN-2
2.2 PDW 900
and 1250 litre combo tanks
1) Transport eyebolt
2) R 1 ½" sleeve for de-aeration
3) Neck flange with heat exchanger without circulation
4) R 1 ½" sleeve for immersion heater
5) R 1 ½" sleeve for heat pump domestic hot water flow
6) R 1 ½" sleeve for heat pump domestic hot water return
7) R 1 ½" sleeve for heating circuit flow
8) R 1 ½" sleeve for heat pump heating flow
9) Neck flange for optional solar heat exchanger
10) 2 brackets for domestic water sensors
11) 2 brackets for buffer tank sensors (for use with a solar con-
nection)
12) 1/2" Rp sleeve with immersion sleeve for thermometers
13) Threaded socket with adjusting screws