Table of Contents
Advertisement
Figure 39
Step 8
instructions
Step 9
to predrill the holes for the overlapped sections for ease of
Figure 40
General Maintenance
Recommended areas to inspect are as follows:
3 90 20306761
Overlap
Screws
Vermont Castings • Intrepid DV Owner's Manual_R12 • 12/18
Supplemental Canadian Instructions
Vertical Through Existing Chimney
installed in accordance with the national, Provincial/State and
Converting a Class-A Metal Chimney or Masonry
Chimney to a Direct Vent System
Application
system is approved for use on the brand name appliance
IMPORTANT
Read all instructions carefully before starting the
installation. Failure to follow these instructions
void the warranty. Be sure to check the appliance
venting and clearance to combustible requirements,
which may vary from one appliance to another.
22
Advertisement
Table of Contents
