Charging The Battery; Setting Up Your Phone For The First Time; Locking/Unlocking The Screen And Keys - Zte BLADE T2 Lite User Manual

Getting Started

Charging the Battery

Your phone's battery should have enough power for the phone to
turn on, find a signal, and make a few calls. You should fully charge
the battery as soon as possible.
WARNINGS! Use only ZTE-approved chargers and USB cables. The
use of unapproved accessories could damage your phone or cause
the battery to explode.
NOTE: Use the USB Type-C charger that comes in-box with your phone to charge the
battery. It's specially built to support Qualcomm® Quick Charge™ 2.0.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall outlet. If the phone is on, you'll see a
charging icon, such as or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
NOTE: If the battery is extremely low, you may be unable to power on the phone even
when it is being charged. In this case, try again after charging the phone for at least
20 minutes. Contact customer service if you still cannot power on the phone after
prolonged charging.
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage and GPS
functionality can drain your battery. You can follow the helpful tips below to conserve
your battery power:
• Use the Power-saver feature in Settings.
• Reduce the screen backlight time.
• Lower the screen brightness.
6
• Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
• Disable the GPS function when not in use. Most applications using this function will
periodically query the GPS satellites for your current location; each query drains your
battery.
Powering Your Phone On/Off
Press and hold the Power/Lock Key to turn on your phone.
•
To turn it off, press and hold the Power/Lock Key to open the options menu. Tap
•
Power off > OK.
NOTE: If the phone freezes or takes too long to respond, press and hold the Power/Lock
Key for about 10 seconds to restart the phone.

Setting Up Your Phone for the First Time

When you first power on your phone after you purchase it or reset it to factory settings
(see Settings – System – Reset Options), you will need to set it up before using it.
1. Tap the language field to select the language you want, and tap LET'S GO.
2. Follow the prompts to set up your Wi-Fi connection, Google account, Google services,
and other options.
NOTE: Users with low vision can tap Vision Settings on the initial setup screen to
customize accessibility features.

Locking/Unlocking the Screen and Keys

Your phone allows you to quickly lock the screen and keys (put the phone into Sleep mode)
when not in use and also to turn the screen back on and unlock it when you need it.
Getting Started
7