Connecting To Bluetooth Devices - Zte BLADE T2 Lite User Manual

Connecting to Networks and Devices
You can use one of the following methods to connect your phone to a wireless network
using WPS.
Method one: WPS button (Recommended)
1. Swipe up on the home screen and tap Settings > Network & Internet > Wi-Fi.
2. Slide the Wi-Fi switch to the On
3. Tap Wi-Fi preferences > Advanced > WPS Push Button.
4. Press the WPS button on the access point, and it will recognize your phone and add it
to the network.
Method two: PIN
1. Swipe up on the home screen and tap Settings > Network & Internet > Wi-Fi.
2. Slide the Wi-Fi switch to the On
3. Tap Wi-Fi preferences > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the access point's setup page.
After entering the PIN, your phone automatically finds the access point and configures
the connection.
NOTE: For detailed information about the WPS feature of the access point, please refer to
its documentation.
Adjusting Advanced Wi-Fi Settings
1. Swipe up on the home screen and tap Settings > Network & Internet > Wi-Fi.
2. Tap Wi-Fi preferences > Advanced to adjust the following settings.
Install certificates: Install certificates needed for connecting to certain Wi-Fi
•
networks.
• Network rating provider: Select the rating provider to help you choose
reputable networks.
38
position.
position.
WPS Push Button: Connect to a WPS network via the push button method.
•
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.
• MAC address: Check the MAC address.
• IP address: Check the phone's IP address.

Connecting to Bluetooth Devices

Bluetooth is a short-range wireless communication technology. Phones or other
devices with Bluetooth capabilities can exchange information wirelessly within a
distance of about 30 feet (10 meters). The Bluetooth devices must be paired before the
communication is performed.
Turning Bluetooth On/Off
1. Swipe up on the home screen and tap Settings > Connected devices > Bluetooth.
2. Slide the Bluetooth switch to the On
When Bluetooth is on, the icon appears in the Status Bar.
Changing the Device Name
1. Swipe up on the home screen and tap Settings > Connected devices > Bluetooth.
2. Slide the Bluetooth switch to the On
3. Tap Device name.
4. Edit the name and tap RENAME.
Pairing With Another Bluetooth Device
1. Swipe up on the home screen and tap Settings > Connected devices > Bluetooth.
2. Slide the Bluetooth switch to the On
Connecting to Networks and Devices
or Off position.
position if Bluetooth is off.
position if Bluetooth is off.
39