Stacking Operation - Canon Staple Finisher-AA1 Service Manual

Stacking Operation

1. The saddle stitcher controller PCB drives the saddle paper end stopper motor (M206) to move the saddle paper end stopper
according to the paper size. Then, it drives the saddle alignment motor (M203) to move the saddle alignment plate to the
paper width +10 mm position.
2. The saddle feed/paddle motor (M201) drives to rotate the saddle feed roller and saddle paddle and feeds the paper to the
saddle processing tray. During this process, the paper is pressed against the saddle paper end stopper to align the paper in
the feed direction.
Rear Saddle
Alignment Plate
Paper Width+10mm
M201
Paper
M203
Paper
Front Saddle
Alignment Plate
Paper Width +10mm
M206
Saddle Paper End Stopper
Saddle Feed Roller
Saddle Paper End Stopper
62
2. Technical Explanation
Saddle Paddle