Basic Operation; Outline - Canon Staple Finisher-AA1 Service Manual

Basic Operation

Outline

Basic operations of this finisher are described below.
■ During stack tray delivery
1. The paper delivered from the host machine is fed by the inlet roller, pre-processing roller, and stack delivery roller.
2. The paper delivered by the pre-processing roller is stacked on the processing tray by the paper end pushing guide and
paddle. The return roller and processing tray stopper align paper in the feed direction.
3. The alignment plates are used to align paper in the width direction.
Pre-Processing Roller
Upper Stack Delivery Roller
Lower Stack Delivery Roller
Paddle
Paper End Pushing Guide
Return Roller
Processing Tray Stopper
Rear Alignment Plate
Paper
Front Alignment Plate
26
2. Technical Explanation
Inlet Roller