Removing The Manual Staple Switch (Sw103) - Canon Staple Finisher-AA1 Service Manual

2. Remove the switch [1].
• 1 connector [2]
1x
Removing the Manual Staple
Switch (SW103)
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
■ Procedure
1. Disassemble the front inner cover [1].
• 3 screws [2]
3x
2. Remove the switch holder [1].
• 1 screw [2]
[1]
[2]
[1]
[2]
[1]
3. Remove the switch PCB [1].
• 1 screw [2]
• 1 connector [3]
1x
1x
[2]
130
4. Parts Replacement and Cleaning
1x
[1]
[2]
[3]
[2]
[1]