3. Remove the grate-shaped lower guide.
" Removing the Grate-Shaped Lower Guide" on page
96
4. Remove the side covers (front and rear) [1] [2].
• 1 screw [3] each
2x
[3]
[1]
5. Remove the processing tray.
" Removing the Processing Tray" on page 102
■ Procedure
1. Remove the motor unit [1].
• 1 belt [2]
• 2 screws [3]
• 1 connector [4]
2x
[2]
1x
CAUTION:
Do not forget to hook the tensioner when installing the
belt.
2. Remove the motor [1].
• 2 screws [2]
[2]
[3]
[4]
[1]
125
4. Parts Replacement and Cleaning
2x
[1]
Removing the Stapler Shift
Motor (M114)
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
■ Procedure
1. Process the harness.
• 2 connectors [1]
• 3 wire saddles [2]
2x
3x
[1]
[2]
2. Remove the motor unit [1].
• 3 screws [2]
• 1 belt [3]
[2]