Saddle Stitcher Area; Fold Placement / Saddle Stitch Adjustment - Canon Staple Finisher-AA1 Service Manual

Saddle Stitcher Area

Fold Placement / Saddle Stitch Adjustment

CAUTION:
In the case performing this adjustment, record user mode setting value before the adjustment. Input 0 for setting value and
start the adjustment.
• Adjustment/Maintenance > Adjust Action > Adjust Saddle Stitch Fold Position
• Adjustment/Maintenance > Adjust Action > Adjust Fold Position
• Adjustment/Maintenance > Adjust Action > Change Fold/Stitch Position
Fold Placement/Saddle Stitch
Adjustment
Misalignment
Fold Placement
No
Misalignment
Saddle Stitch
No
END
No
Adjusting the Saddle Paper End Stopper
1
Installation Angle
Adjusting the
2 Adjusting the Fold Placement
Fold Position
Adjusting the Saddle Alignment Plate
3
Position
Adjusting the Stitcher Unit Installation
4
Position
Adjusting the
Saddle Stitch
5 Adjusting the Saddle Stitch Position
Yes
Paper skewing
No
Yes Slant
Parallel
Items
Yes
1.Adjusting the Saddle Paper End
Feed
2.Adjusting the Fold Placement
direction
Front/Rear 3.Adjusting the Saddle Alignment
direction
4.Adjusting the Stitcher Unit Installation Position
5.Adjusting the Saddle Stitch Position
Use case
If the fold position of the paper stack deliv-
ered from the saddle stitcher unit is
skewed.
When misalignment occurs in feed direc-
tion.
When misalignment occurs in front/rear di-
rection.
• When the stitch positions of the front
and rear sides become misaligned
• If you remove or replace the stitcher
unit
When the saddle stitch position in the sad-
dle stitch mode.
188
6. Troubleshooting
Stopper Installation Angle
Plate Position
Refer to
"Adjusting the Saddle Paper
End Stopper Installation An-
gle" on page 162
"Adjusting the Fold Place-
ment " on page 164
"Adjusting the Saddle Align-
ment Plate Position " on
page 165
"Adjusting the Stitcher Unit
Installation Position " on
page 167
"Adjusting the Saddle Stitch
Position " on page 171