BellSouth GH9640 Owner's Manual page 8

Getting Started
8. Install the HANDSET BATTERY PACK by
plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT. The
HANDSET LCD Screen will display "RING: HI".
9. Place the BATTERY PACK inside the BATTERY
COMPARTMENT.
10. Slide the HANDSET BATTERY COMPARTMENT
cover firmly into play in its closed position.
11. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours. Do not charge the
HANDSET with KEYPAD face down.
12. TONE/PULSE Select setting: (Function setting)
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select setting
to the TONE mode.
B. If you have a rotary dialing system, set the
TONE/PULSE Select setting to the PULSE
mode.
C. If you are unsure which system you have, set
the TONE/PULSE Select mode to the TONE
talk
mode. Press the button on the
HANDSET to get a dial tone and make a call.
If the call connects, leave the mode as is,
otherwise set to the PULSE mode. Unit is
defaulted for TONE dialing
HS Number
BATTERY PCAK
BATTERY
CONNECTOR
BATTERY
COMPARTMENT
COVER
Getting Started
After the battery is installed, the handset LCD will display "PLS REGIST." put the handset onto the
charge cradle and seat in the cradle for minimum of 6 seconds for master base to complete the
charge ID code exchange and handset registration process. Confirmation beep for notifies the
success of the registration. After registration is completed the LCD display will change to Idle mode
display "RING:HI, HS # , Date/Time, CH#" ..etc.
If 3 error beeps is appear which means the charge and registration is not completed user may lift the
handset and put the handset back to cradle again unit the single beep confirmation tone is appear.
Warning label to be put on that handset.
automatically registered. Place the extra handset from the small charger base to the master base
charge cradle." "Wait minimum o f 6 seconds before removing the handset.
If a total empty battery is installed the first time, put the handset on to the cradle and charge for 12
hrs or until the battery low ICON is disappear, when battery low ICON is disappear the handset will
show lift the handset, until the user lift the handset, the display will show "PLS REGIST." user will
follow the register process to complete the registration process.
"The handset charge on the master base will be