Installing The Wlan Ap 8120-O On A Wall - Avaya WLAN 8100 Regulatory Information

English

Installing the WLAN AP 8120-O on a wall

Complete the following procedure to mount the WLAN AP 8120-O on a wall.
Procedure
1. Mark the four locations of the mounting holes on the plane bracket on to the wall.
2. Drill an 8 mm- diameter hole with a depth of 36 mm to 38 mm into each of the
34 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O
b. To connect the Avaya PoE injector to the WLAN AP 8120-O, see
Power over Ethernet injector
Figure 13: Marking holes on a surface
markings.
Comments? infodev@avaya.com
on page 43.
Installing the
February 2012