Avaya WLAN 8100 Regulatory Information page 33

9. Insert Avaya 2.4 GHz antennas as required into the connectors at the bottom of the
10. The WLAN AP 8120-O is powered by a Power over Ethernet (PoE) device. Choose
Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O
WLAN AP 8120-O. Tighten the antennas by hand.
Figure 12: AP 8120-O antenna connectors
one of the following options to connect an Ethernet surge arrester and PoE injector
to the WLAN AP 8120-O.
Note:
If you are using the Avaya PoE injector, you are not required to use the supplied
Ethernet surge arrester as the Avaya PoE injector has internal surge
protection.
a. To connect the supplied Ethernet surge arrester to the WLAN AP 8120-O, see
Installing the Ethernet surge arrester
Installing the WLAN AP 8120-O
on page 39.
February 2012 33