4. Connect the other end of the wire to a proper Earth ground.
5. Insert the Ethernet cable running from the Ethernet/PoE equipment into one of the
6. Insert the wateproofed end of the Ethernet cable into the bottom of the WLAN AP
Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O
Figure 19: Open Ethernet surge arrester showing ground screw and RJ-45 connectors
RJ-45 connectors in the Ethernet surge arrester.
8120-O, tightening in place by hand. See the waterproofing the Ethernet UTP cable
section,Waterproofing the Ethernet UTP cable
Ethernet cable.
Installing the WLAN AP 8120-O
on page 23 for waterproofing the
February 2012
41