Installing The Wlan Ap 8120-O On A Wall - Avaya WLAN 8100 Series Installation Job Aid

b. To connect the Avaya PoE injector to the WLAN AP 8120-O, see
over Ethernet
Related Links
Installing the WLAN AP 8120-O

Installing the WLAN AP 8120-O on a wall

Complete the following procedure to mount the WLAN AP 8120-O on a wall.
Procedure
1. Mark the four locations of the mounting holes on the plane bracket on to the wall.
Figure 14: Marking holes on a surface
2. Drill an 8 mm- diameter hole with a depth of 36 mm to 38 mm into each of the markings.
June 2014
injector.
on page 5
Installation Job Aid (English) for Avaya WLAN 8100 series- WLAN AP 8120-O
Installing the Power
18