Stay Arming The System With The Keypad; Silent Exit Delay; Night Arming The System With The Keypad - DSC HS2016 User Manual

4 S e c u r i n g t h e P r e m i s e s

4.1.2 Stay Arming the System with the Keypad

Stay mode partially activates your alarm system by:
• Arming all perimeter sensors.
• Bypassing all interior sensors.
To Arm the System in Stay mode
1. Ensure all windows and doors are closed and that the Ready
2. Press and hold the Stay key
[access code]. Do not leave the premises.
3. If zones have been bypassed a warning appears.
4. After successfully initiating the arming sequence the:
• Armed indicator turns on.
• Ready indicator remains lit.
• Exit Delay timer begins counting down.
5. To cancel the arming sequence, enter your [access code].
6. Once the exit delay timer expires thereby arming the system the:
• Ready indicator turns off.
• Armed indicator remains on.
• Bypass or system indicator activates.

4.1.2.1 Silent Exit Delay

If the system is armed using the Stay key
• The warning beep is silenced.
• The exit time is doubled for that exit period only (CP-01 versions only).
NOTE:
For non CP-01 versions, Standard Exit Time is used.

4.1.3 Night Arming the System with the Keypad

Night mode partially activates the alarm system by:
• Bypassing all internal sensors configured as Night zones.
• Arming all perimeter sensors.
• Arming all other internal sensors.
Arming the system in Night mode is only possible after the system has first been armed in Stay mode. To
access armed interior areas when the system is armed in Night Mode you must disarm the system.
NOTE:
Ensure that your installer has provided you with a list identifying all programmed night zones.
for 2 seconds and if required enter your
or the No Entry Arming method
10
What you see
Date
indicator is on.
JAN 02/13
System is
Ready to Arm
then
Enter Your
Access Code
* Warning *
Bypass Active
Exit Delay in
Progress
System Disarmed
No Alarm Memory
System Armed
in Stay Mode
*
Time
2:06a
9
: