DSC HS2016 User Manual page 22

7 M a n a g i n g U s e r s
7.1 User Codes
Up to 95 different users can be programmed in the HS Series. Each user can be:
• Uniquely labeled.
• Assigned an access code.
• Assigned a proximity tag and/or wireless key (key fob). In order to operate, proximity tags and wire-
less keys must be enrolled in the system.
• Assigned to only operate specific partitions. For more information on partitions see section 10 "Man-
aging Partitions".
• Configured with additional attributes. For more information see 7.2 "Configuring additional User
Options".
NOTE:
Your installer configures all access codes to be either 4 or 6 digits. You cannot have access codes
of both lengths on your system.
Programed zones are flagged in the LCD screen. For more information on user flags see Table 7-1.
Table 7-1 User Flags
LCD Display
User Code 01 -
User Code 01 P
User Code 01 T
To Access the User Codes Menu
*
5
1. Press
OR
*
press and use the scroll keys
*
press .
2. Enter [Master or supervisor code] and scroll through the list of Users. To edit a
desired user press
3. To go back to the Ready state press
Flag
- Unprogrammed code.
P Programmed code.
T Code and tag/key are programmed.
*
.
#
.
Description
to navigate to User Codes and
22
What you see
Press (*) for <>
User Functions
Enter Master
Access Code
then
Press (*) for <>
{User Label}