DSC HS2016 User Manual page 25

7 M a n a g i n g U s e r s
To Edit a User Label (Continued)
2. Use the arrow keys
character.
3. Press the number key corresponding to the appropriate letter as shown in Fig-
ure 7-1.
4. When the required letter or number is displayed use the arrow keys
scroll to the next letter.
5. When finished, press the
*
then press
7.1.5 Assigning a Partition to a User code
User codes can be configured to have access only to specific partitions. For more information see section
10 "Managing Partitions".
NOTE:
Partitions are configured by your installer.
To Assign a Partition to a User code
1. From the User Codes menu press
*
and press .
*
2. Press to toggle assigning, Y or N, the partition to the user.
7.2 Configuring additional User Options
Users can also be assigned the following options:
Supervisor
Duress Code
Zone Bypass
Remote Access
Bell Squawk
One Time Use
To Configure additional User Options
1. From the desired user code press
*
press .
to move the cursor to a blank space or existing
*
key, use the
.
5
Use when you want to allow additional users to manage User Codes or User
Functions. Supervisor codes created by the master code will have the same
attributes as the master code. Supervisor codes created by another supervisor
code will have the same attributes, except the supervisor attribute. Must be
assigned manually afterwards. After creation, attributes can be changed for all
supervisor codes.
Use when forced to access your keypad under threat. A Duress Code operates
your system normally but transmits a Duress Report to your monitoring sta-
tion.
Grants the user the ability to bypass zones.
Grants the user the ability to use SMS features. For more information see 6.3
"SMS Command and Control"
Use to generate a bell squawk when arming/disarming the system.
Use when needing to grant someone one time access to your home for a 24-
hour period, i.e., a cleaning person or contractor. During the 24-hour period the
user can only disarm the system once, but has no restriction on the number of
times they can arm the system.
6
keys to scroll to Save
or scroll to Partition Assign
or scroll to User Options and
25
What you see
Program Name
{User 1 Label}
to
What you see
Press (*) for <>
Partition Assign
(*) To Toggle <>
{Partition Lb} Y
What you see
Press (*) for <>
User Options