Arming The System; Away Arming The System With The Keypad - DSC HS2016 User Manual

Chapter 4.0 Arming the System

4.0 Arming the System

The PowerSeries Neo system can be armed using a keypad, a 2-way wireless key or a proximity
tag.

4.1 Away Arming the System with the Keypad

Away mode activates the complete alarm system by:
Arming all perimeter sensors.
l
Arming all interior sensors.
l
To Arm the System in Away Mode
1. Ensure all windows and doors are closed and that the Ready
indicator is on.
2. To arm using the Away key
key f or 2 seconds and, if required, enter your [access code] or
present your proximity tag.
OR
To Quick Arm the system press [*][0].
3. If zones have been bypassed, ICN or LED keypads bypass
LED will light and the bypassed zones #s will be shown.
On an LCD keypad a warning appears.
4. After successfully initiating the arming sequence the:
Armed indicator turns on.
l
Ready indicator remains lit.
l
Exit Delay timer begins counting down.
l
Keypad beeps six times, continues beeping once per second
l
until beeping rapidly in the final ten seconds.
The system may be configured to have a persistent exit
l
delay that only ends when the exit door is opened and
closed, or when a button is pressed outside the protected
premises.
5. To cancel the arming sequence, enter your [access code] or
present your proximity tag to the keypad reader.
6. Once the exit delay timer expires, thereby arming the system,
the:
Ready i ndicator turns off.
l
Armed indicator remains on.
l
Keypad stops sounding.
l
Note: The installer configures the exit delay timer and whether or not an access code is required
for arming the system.
, press and hold the Away
- 9 -
LCD Display
Date Time
JAN 02/13 2:06a
System is
Ready to Arm
Present Tag or
Enter Code
* Warning *
Bypass Active
Exit Delay in
Progress
System Disarmed
No Alarm Memory
System Armed
in Away Mode
then