Installing And Setting Up The Scanner; Step 1. Connecting The Scanner To Your Computer - Plustek MobileOffice D430 User Manual

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the Plustek
scanner.

Step 1. Connecting the Scanner to Your Computer

Attention
1. Plug the AC adapter into the scanner's power receptor.
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port of the scanner.
4. Plug the rectangular end of the USB cable to the USB port of your computer.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the
USB hub.
3
The USB hub is not included with the scanner. If using a hub, you are recommended to use a
hub with its own external power adapter.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
6
3
, make sure that the hub is