Installing And Setting Up The Scanner; Step 1. Connecting The Scanner To Your Computer - Plustek PN30U User Manual

I
NSTALLING AND
Please follow the step-by-step procedures described below to install the Plustek
scanner.
Attention

Step 1. Connecting the Scanner to Your Computer

Attention
1. Plug the AC adapter into the scanner's power receptor
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port
the scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
S
ETTING UP THE
Choose a Proper Site First!
Always place your scanner on a level,
smooth and strong surface before proceeding
the scanner setup or any scanning task.
Tilted or uneven surface may cause paper-
feeding errors, scanner damage or personal
injury.
Avoid using
environment. Dust particles and other foreign
objects may damage the unit.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
9
S
CANNER
the scanner in
.
a dusty
at the rear of