Scanning From The Icon In The Left Side Of The Docaction Window - Plustek MobileOffice D430 User Manual

Information
Click the Help button within the Button Configuration window for more information
about the settings.
View Button Settings
There are three ways to view the button settings:
Double-click the icon
Right-click the icon
Button Configuration... in the pop-up menu that opens.
View your memo if you write down the customized button number settings on
the memo label.
Scan from the Scanner Buttons
1. Insert the document face up into the scanner. Adjust the paper width slider for
the paper size you are using.
2. Check current button settings by viewing the memo label or the Button
Configuration window. If needed, you may also modify settings to meet your
current needs. (Refer to "View Button Settings" and "Configure Button
Settings" for more information.)
3. Press the UP or DOWN button to select the desired task.
4. Press the Scan button.
5. The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Attention
Scanning from the Icon in the Left Side of the DocAction
Window
You can perform scanning task by double-clicking the icon in the left side of the
DocAction window. Follow the steps described below:
It's optional for you to write down the
customized button number settings on the
included memo label and place this memo
anywhere on the scanner.
in the Windows system tray.
in the Windows system tray, and then choose
Place only text documents for OCR purposes.
Do not scan a photo using the OCR button.
17