Installing And Setting Up The Scanner; Step 1. Connecting The Scanner To Your Computer - Plustek 0307 User Manual

I
NSTALLING AND
Please follow the step-by-step procedures described below to install the Plustek
scanner.
Attention

Step 1. Connecting the Scanner to Your Computer

Using the USB Cable to connect the Scanner and Your Computer
Attention
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port
the scanner.
S
ETTING UP THE
Choose a Proper Site First!
Always place your scanner on a level,
smooth and strong surface before proceeding
the scanner setup or any scanning task.
Tilted or uneven surface may cause paper-
feeding errors, scanner damage or personal
injury.
Avoid using the
environment. Dust particles and other foreign
objects may damage the unit.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
9
S
CANNER
scanner in a dusty
.
at the rear of