HP XP7 User Manual page 80

SSB2 code
20BD
20BE
20C5
20C9
20CA
20D0
20D1
20D6
20D7
20DC
20DF
20E4
20E6
20E9
22F6
22F7
22F9
2301
2306
2309
80 Troubleshooting Business Copy Z
Description
The pair task was rejected because the emulation type of the volume you specified as the P-VOL is
3390-V.
The pair task was rejected because the emulation type of the volume you specified as the S-VOL is
3390-V.
The command was rejected because you were in the process of turning off the storage system's power.
The emulation type of the P-VOL was 3390-A, and the pair task is rejected because of one of the
following reasons:
Mainframe Fibre CHA is not mounted.
Mainframe Fibre CHA is all blocked.
The S-VOL's emulation type was 3390-A, and the pair task was rejected because of one of the following
reasons:
Mainframe Fibre CHA is not mounted
Mainframe Fibre CHA is all blocked
The P-VOL rejected the paircreate RAID Manager command because the THP pool is initializing
in the THP or Smart V-VOL.
The S-VOL rejected the paircreate RAID Manager command because the THP pool is initializing
in the THP or Smart V-VOL.
The pair task was rejected because Compatible FlashCopy SE is using the P-VOL or the P-VOL is a
TSE volume.
For more information about pair volume requirements, see
(page 11).
The pair task was rejected because the S-VOL is a TSE volume.
For more information about pair volume requirements, see
(page 11).
You cannot use the specified P-VOL for BC Z, because it is being used in BC.
The volume which was specified as the S-VOL cannot be used, because the volume is undergoing
online data migration.
The command was rejected because if sharing volume between Cnt Ac-J S-VOL and BC P-VOL, Business
Copy CTG pair created by BCM or PPRC and Business Copy CTG pair created by RAID Manager
cannot co-exist.
The CTG pair split function cannot be used from RAID Manager for CTG reserved on Remote Web
Console.
The pair task was rejected because the volume you specified as the P-VOL is a S-VOL for an existing
pair, and the volume you specified as the S-VOL is the P-VOL for another existing pair.
The pair task was rejected because the volume you specified as the P-VOL is a Compatible FlashCopy
T-VOL.
The pair task was rejected because the volume you specified as the S-VOL is a Compatible FlashCopy
S-VOL or T-VOL.
The pair was not restored because the volume you specified as the S-VOL is a Compatible FlashCopy
S-VOL or T-VOL.
The pair task was rejected because there is not a sufficient amount of installed shared memory or BC
Z is not installed.
The pair task was rejected because the LBA size of the specified P-VOL is not the same as the size of
the specified S-VOL.
The pair was not created because the number of pairs exceeded the maximum number of pairs.
"Business Copy Z system requirements"
"Business Copy Z system requirements"