HP XP7 User Manual page 101

The following table shows the field descriptions of the output resulting when you run the CQUERY
TSO PPRC and QUERY ICKDSF PPRCOPY commands.
Field
DEVICE
LEVEL
STATE
PATH STATUS
CRIT
CGRPLB
PRIMARY-SSID
PRIMARY-CCA
PRIMARY-LSS
PRIMARY-SERIAL
SECONDARY-SSID
SECONDARY-CCA
SECONDARY-LSS
SECONDARY-SERIAL
PATHS
SAID DEST STATUS
DESCRIPTION
Description
Device number of the volume on which the CQUERY command is issued.
PRIMARY indicates that the volume is a P-VOL. SECONDARY indicates that the volume
is a S-VOL.
Pair status
Invalid for BC/SS; "Active" is shown.
Invalid for BC/SS; "NO" is shown.
Invalid for BC/SS; "NO" is shown.
SSID of the P-VOL CU
P-VOL LDEV number
P-VOL CU number
P-VOL serial number
SSID of the S-VOL CU
S-VOL LDEV number
S-VOL CU number
S-VOL serial number. Run the CQUERY TSO PPRC command for the S-VOL to show the
following information:
00ab000nnnnn
where "a" indicates that the pair is defined as a CG and "b" indicates that you split the
pair using CG pair-split. "0" indicates otherwise. "nnnnn" is the S-VOL serial number.
Invalid for BC/SS; "1" is shown.
Invalid for BC/SS; "FFFF FFFF" is shown.
Invalid for BC/SS; "PATH ESTABLISH" is shown.
Showing pair status and volume information with CQUERY TSO and QUERY ICKDSF 101