HP XP7 User Manual page 41

5. In the Select Secondary Volumes window of the Create BC Pairswizard, assign LDEVs as S-VOL
to the specified P-VOL LDEV (or LDEVs). Complete the following, and then click Finish:
If you specified one P-VOL, select a secondary LDEV from the Available LDEVs table, and
click Set. Repeat this step to assign additional S-VOLs.
If you specified multiple P-VOLs, select an LDEV from the Available LDEVstable, and then
select a P-VOL LDEV from the Selected Pairs table, and click Set. Repeat this step as many
times as needed to make all your pairings.
NOTE: If you do not select a P-VOL from the Selected Pairs table, the S-VOL you select
and set is assigned to P-VOLs in the order they are listed in the table.
(Optional) To sort the Available LDEVs and Selected Pairs tables according to the capacity,
for Capacity, choose a capacity item by which to sort the tables.
The remaining number you have to select refers to the P-VOLs that do not have an assigned
S-VOL, as seen in the Selected Pairs table.
(Optional) To sort the Selected Pairs table, click Sort in the middle-left.
(Optional) To change the split type and the rate at which data is copied, which applies
to all new pairs, change the pair options.
For more information about changing pair options, see
(page 47).
(Optional) To change MU numbers, do the following:
a. Select the line for the LDEV in the Selected Pairs table.
b. Click Edit Mirror Units.
c. In the Edit Mirror Units dialog box, specify the S-VOL's L1mirror unit number, and click
OK.
(Optional) Change the pair options.
For more information about changing pair options, see
(page 47).
(Optional) To remove an unwanted LDEV or pair from the Selected Pairs table, select the
line for the LDEV or pair you want to remove and click Remove.
For more information about removing rows to alter pair configuration, see
for setting up pair configurations for BC Z" (page
"Changing BC Z pair options"
"Changing BC Z pair options"
42).
BC Z pair creation
"Workflow
41