HP XP7 User Manual page 119

Item
Secondary Volume (continued)
Description
Values:
LDEV ID: The S-VOL's LDEV identifier.
LDEV name: The S-VOL's LDEV name.
Provisioning Type: The S-VOL's provisioning type, which can be one of the following:
◦
Basic: Internal volume
◦
THP: THP V-VOL
◦
External: External volume
◦
Snapshot: FS volume
Emulation Type: The S-VOL's emulation type.
Capacity: The S-VOL's volume capacity.
CLPR: The S-VOL's CLPR number.
Encryption: The S-VOL's encryption information.
◦
Enabled: Encryption of the parity group to which the S-VOL's LDEV belongs is
enabled.
◦
Disabled: Encryption of the parity group to which the S-VOL's LDEV belongs is
disabled.
If LDEV is THP V-VOL, external volume or migration volume, a hyphen (-) displays.
Mode: Indicates whether the HP XP7 storage system has written to the S-VOL. For
BC, this item also indicates whether the HP XP7 storage system can read the S-VOL.
◦
For BC:
- W is shown when the HP XP7 storage system has written data to the S-VOL.
W is also shown when the HP XP7 storage system has written data to the S-VOL
and the S-VOL cannot be read when its pair status is "PSUS(SP)/PSUS" or
"PSUS".
- N is shown when the S-VOL cannot be read because you specified "-m noread"
using RAID Manager.
- A hyphen (-) indicates that the HP XP7 storage system has not written to the
S-VOL.
◦
For FS:
- W is shown if the HP XP7 storage system has written data to the S-VOL when
its pair status is "PSUS(SP)/PSUS" or "PSUS".
- A hyphen (-) indicates that the HP XP7 storage system has not written to the
S-VOL.
◦
For BC Z:
- W is shown when the HP XP7 storage system has written data to the S-VOL
when its pair status is "V-Split/SUSPVS" or "Split/SUSPOP".
- Protect is shown when you have set the Protect attribute using BCM when the
S-VOL's pair status is "Split/SUSPOP", "SP-Pend/TRANS", or "V-Split/SUSPVS".
- A hyphen (-) indicates that the HP XP7 storage system has not written to the
S-VOL.
Values (continued):
Virtual Storage Machine: The model type and serial number of the virtual storage
machine to which the S-VOL belongs.
Virtual LDEV ID: The identification number of the S-VOL's virtual LDEV. If no virtual
LDEV ID is assigned, a blank displays.
View Pair Properties window 1 19