Setup
Selecting
Reader Location
WARNING
CAUTION
Environmental
Factors
This chapter describes the setup procedure for the contactless reader, in the
following sections:
•
Selecting Reader Location
•
Unpacking the Shipping Carton
•
Examining the Reader Features
•
Installing or Replacing SAM Cards
•
Connecting Unit to a Controlling Device
•
Contactless Support
•
Mounting the Reader
•
Using the Reader
Use the following guidelines when selecting a location for your contactless reader:
•
Select a location convenient for the customer.
•
Select a location near the device that will be connected to the contactless unit.
For safety, do not string cables or cords across a walkway.
Metallic objects in close proximity to the reader may cause card detection
problems. Avoid placing metallic objects at the front of the card reader, apart from
the mounting surface.
The contactless device is waterproof and dustproof, and is suitable for outdoor
use. The reader is designed for any rainfall to run off of it and fade-proof from sun
exposure.
C
HAPTER
QX700 I
G
NSTALLATION
UIDE
2
9