Table of Contents
Advertisement
Contactless
Support
Mounting the
Reader
NOTE
To mount the reader
CAUTION
NOTE
This device supports the global contactless program specifications from American
Express, MasterCard, Visa, Discover, ISIS SmartTap, and Google Wallet with
virtually no changes to existing payment hardware or software.
The reader is designed to be flush-mounted to the mounting surface, without
further need for any external mounting devices.
Your mounting surface may have different installation instructions. Refer to your
mounting device's user guide for further instructions.
1
Align the contactless unit stud holes with the stud holes of your mounting
surface.
2
Flush-mount the reader, and secure the unit with M5 nuts.
Metallic objects in close proximity to the reader may cause card detection
problems. Avoid placing metallic objects at the front of the card reader, apart from
the mounting surface.
Use M5 mounting studs with a minimum length of 12 mm.
To tighten the nuts, use either a socket wrench, or an open jaw wrench, with a
recommended tightening torque of 7.0 kgfcm.
Figure 7
Mounting the Contactless Reader
S
Contactless Support
QX700 I
G
NSTALLATION
UIDE
ETUP
15
Advertisement
Table of Contents
