Machine the workpiece
3.10 Simulating machining
3.10.5.2
3D view
Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change
the segment.
Displaying and moving cutting planes
You can display and move cutting planes X, Y, and Z.
See also
Enlarging or reducing the graphical representation (Page 111)
Panning a graphical representation (Page 112)
Rotating the graphical representation (Page 112)
Modifying the viewport (Page 113)
3.10.5.3
4-window view
Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change
the segment.
The segment changes for the top view and side view synchronously.
106
1.
Start the simulation.
2.
Press the "3D view" softkey.
Software option
You require the option "3D simulation (finished part)" for the simulation.
1.
Start the simulation.
2.
Press the "Additional views" and "4-window view" softkeys.
The 4-window view shows the top view (top left window) and side view
(top right window and bottom left window) as well as a 3D view
(bottom right window) with the appropriate option.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal