Starting Simultaneous Recording; Simultaneous Recording During Machining Of The Workpiece - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
3.10 Simulating machining
3.10.3.1

Starting simultaneous recording

Procedure
3.10.4

Simultaneous recording during machining of the workpiece

If the view of the work space is blocked by coolant, for example, while the workpiece is being
machined, you can also track the program execution on the screen.
You can switch on the simultaneous recording of the machining process even when the
machining of the workpiece is already running on the machine.
Procedure
104
1. Load a program in the "AUTO" mode.
2. Press the "Prog. ctrl." softkey and activate the checkboxes "PRT no
axis movement" and "DRY run feedrate".
The program is executed without axis movement. The programmed
feedrate is replaced by a dry run feedrate.
3. Press the "Sim. rec." softkey.
4. Press the <CYCLE START> key.
The program execution is displayed graphically on the screen.
5. Press the "Prog. ctrl." softkey and deactivate the "DRY run feedrate"
checkbox.
Simultaneous recording is performed with the programmed feedrate.
Software options
You require the option "Simultaneous recording (real-time simulation)" for
the simultaneous recording.
1. Load a program in the "AUTO" mode.
2. Press the "Sim. rec." softkey.
3. Press the "CYCLE START" key.
The machining of the workpiece is started and graphically displayed
on the screen.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal