Mda; Loading An Mda Program From The Program Manager - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

2.9 MDA

2.9 MDA
In "MDA" mode (Manual Data Automatic mode), you can enter G-code commands block-by-
block and immediately execute them for setting up the machine.
You can load an MDA program straight from the Program Manager into the MDA buffer. You
may also store programs which were rendered or changed in the MDA operating window into
any directory of the Program Manager.
2.9.1

Loading an MDA program from the Program Manager

Proceed as follows
70
1. Select the "Machine" operating area.
2. Press the "MDA" key.
The MDI editor opens.
3. Press the "Load MDA" softkey.
A changeover is made into the Program Manager.
The "Load in MDA" window opens. The program manager is displayed
in it.
4. Select the program that you would like to edit or execute in the MDA
window.
5. Press the "OK" softkey.
The window closes and the program is ready for operation.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal