Storing Any New File - Siemens SINUMERIK 840D sl Operating Manual

7.4.4

Storing any new file

In each directory or subdirectory you can create a file in any format that you specify.
This does not apply to the NC memory. Here you can create the following file types under a
workpiece using the "Any" softkey.
Procedure
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
6. Enter the desired program name and press the "OK" softkey.
The program name can contain up to 28 characters (name + dot. + 3-
character extension).
You can use all letters (except accented characters), digits and
underscores (_).
1. Select the "Program manager" operating area.
2. Select the desired storage location and position the cursor on the
folder, in which you would like to create the file.
3. Press the "New" and "Any" softkeys.
The "Any new program" window appears
...
4. Select a file type from the "Type" selection field (for example,
"Definitions GUD") and enter the name of the file to be created when
you have selected a workpiece directory in the NC memory.
The file automatically has the selected file format.
- OR -
7.4 Creating a directory/program/joblist/program list
Program management
185