Status Display - Siemens SINUMERIK 840D sl Operating Manual

6 Axis position display in actual value window
7 Display for
active tool T
•
current feedrate F
•
active spindle with current status (S)
•
8 Operating window with program block display
9 Display of active G functions, all G functions, H functions and input window for different functions (for example, skip
blocks, program control)
10 Dialog line to provide additional user notes
11 Horizontal softkey bar
12 Vertical softkey bar
1.4.2

Status display

The status display includes the most important information about the current machine status
and the status of the NCK. It also shows alarms as well as NC and PLC messages.
Depending on your operating area, the status display is made up of several lines:
● Large status display
● Small status display
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
The status display is made up of three lines in the "Machine" operating area.
In the "Parameter", "Program", "Program Manager", "Diagnosis" and "Start-up" operating
areas, the status display consists of the first line from the large display.
Introduction
1.4 Operator interface
19