Slots And Interfaces; About Slots, Subslots, And Port Numbering; Specifications Of Cisco 1100 Series Integrated Services Routers; Periodic Inspection And Cleaning - Cisco 1100-8P Hardware Installation Manual

Overview of Cisco 1000 Series Integrated Services Routers
• Maximum output power: Up to 66W for non-PoE supply and up to 125W for PoE supply
• Optional PoE and PoE+
• Output voltage: +12VDC for system power and -53.5VDC for PoE power

Slots and Interfaces

About Slots, Subslots, and Port Numbering

The Cisco 1100 series designates its interfaces using a 3-tuple notation that lists the slot, sub slot and port in
the format slot/sub-slot/port. The slot number is reserved for the mother board, which is "0". Each interface
type is allocated a sub slot and the port number is a unique port on the interface.
Table 4: Slot, Bay, and Port Numbering
Subslot
0
1
2
3
4

Specifications of Cisco 1100 Series Integrated Services Routers

For specifications on the Cisco 1100 Series ISRs, refer to the

Periodic Inspection and Cleaning

We recommend that you periodically inspect and clean the external surface of the router is recommended to
minimize the negative impact of environmental dust or debris. The frequency of inspection and cleaning is
dependent upon the severity of the environmental conditions, but we recommend a minimum once every six
months. Cleaning involves vacuuming router air intake and exhaust vents.
Note Sites with ambient temperatures consistently above 25°C or 77°F and with potentially high levels of dust or
debris might require periodic preventative maintenance cleaning.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
Interface Type
Ethernet LAN
Ethernet WAN
LTE
DSL
WIFI
Cisco 1100 Series ISR Specifications
Slots and Interfaces
document.
13