Kohler VIA Series Installation Instructions Manual page 24

B. Methods two and three: During remote installation, fix
the cover onto the tank and pull the air hose to the
panel. Reserve access panel at front to ensure
removal and installation of cover.
B.
Method two: During remote plate installation,
7~20mm thickness is recommended for the wall of
the pinch plate and at least 80mm gap is reserved.
Recommended installation hole size of
+2 +2
297 X 157 mm to remote plate installation.
0 0
Method three: During remote installation of mask, 4
holes with diameter of 10mm and depth of 16mm are
needed to be reserved at the locating hose. Drill
10mm holes through air hose on the side of mask.
7~20mm
+2
297 X
0
4 10mm 16mm
2) K-23055T-PNE access panel installation and installation
hole size
2) K-23055T-PNE
There is only remote installation with K-23055T-PNE,
During remote installation, fix the cover onto the tank
and pull the air hose to the panel. Reserve access panel
at front to ensure removal and installation of cover.
Recommended installation hole size of
+2 +2
146 X 41 mm .
0 0
3) K-23056T/ K-23056TW
3) K-23056T/ K-23056TW
a) There is only press from front installation with
23056T/K-23056TW
a) K-23056T/K-23056TW
b) Install the mask in the block screen of the tank, and
tighten the screw to fix the mask to the tank.
b)
1288805-T01-B
80mm
+2
157 mm
0
+2 +2
146 X 41 mm
0 0
access panel installation
.
Pinch plate
Supporting
Board
Air hose
10mm
Pinch Plate
Wall Thickness 7~40mm
K-
Protective Cover
-19-
Cover
Air hose
10 Depth 16,
Space reserved
10 16
7~20mm recommended
7~20mm
Finished wall
At least 80mm gap reserved
80mm
+2
297
0
At least 80mm gap reserved
Adjust length of
pinch plate in
accordance with
wall thickness
7~40mm
+2
41
0
+2
146
0
Fix Mask Onto Wall
Finished
wall
72
+2
157
0
80mm
Mask
Screw
Water Tank