Kohler VIA Series Installation Instructions Manual page 23

5. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
5.
1.
2.
6. According to different faceplates,there are different
installations of access panel as below.
6.
1) K-20341T-PNE/K-75890T-PNE Access Panel
Installation Methods:
There are three ways to install access panel:
Method one: Press from front
Method two: Remote plate installation: fix four plates
with screws
Method three: Remote installation of mask
1) K-20341T-PNE/K-75890T-PNE
A. Method one: Install mask when pressing from front
a) Install the mask in the block screen of the tank, and
tighten the screw to fix the mask to the tank.
A.
a)
b) Cut apart the cable of the air hose and pull it out
from the mask.
b)
1288805-T01-B
Connecting Pipe
Method one:
Press from front
18~62
:
Protective Cover
-18-
Water Pipe
Method two:
Remote plate installation
Suggested faceplate
Suggested faceplate
installation area
installation area
R1000mm
Pinch
plate
Air hose
Water Tank
Cable
Method three:
Remote installation
of mask
R1000mm
Air hose
Mask
Screw